Last Updated on October 3, 2020 by admin
Why seek the services of a mechanic to install speakers in the car when you can do it on your own?
Most people like to listen to music when they are traveling somewhere, or are in their car.
They would like to blast their car speakers on an empty road, or simply put on music when they are in the car.
Car speakers are important for music lovers, and also for those who like to listen to the radio when they are driving.
This article is going to discuss how you can easily install car speakers.
Things to getting
Each car has its own installation method, but the tools needed for each installation job would be pretty much the same. Firstly, you need some different types of screwdrivers, a Torx driver and bits, a drill machine, wrench, socket wrench set, wire cutter or stripper tool (whatever you have available), soldering iron, connectors, crimping tool, panel removal tool, retaining clip remover, file, electrical tape, and a hobby knife.
Now that you have these things, the process of installing speakers in the car can begin.
When you are getting a speaker for the car, first look at the stereo system you would need.
Some systems are stereo audio systems, and they have a limited wattage. If you try to put too many speakers in the same car, it can impact the audio of the music you listen to later.
Make sure that you check the dimensions of the speaker space so that you don’t get one that can’t be fixed in it.
Another thing you need to remember is the quality of the speakers; don’t compromise on quality and price, because speakers are fit in once, and should be purchased from a good shop.
The speakers that are of fabric cones are better than the ones with ceramic permanent magnet speakers.
Lastly, the user should always consider the power requirements of the speaker they are buying, and whether their car will support it or not. For example, if a speaker is of high wattage, then it won’t be able to perform especially with factory wiring.
How to Install Speakers?
The first thing you need to do is check whether the speakers fit in the car or not. If it does, then well and good, but if it doesn’t, then you can easily make modifications or get the right size. Next, you need to disconnect the cat battery’s so that there is no electrical damage due to the installation. Moreover, disconnecting the battery would save you from any electrical shock.
The speaker’s side of the car would be covered with a panel; remove it. For this, you will need a flat head screwdriver, as you have to remove the bolts and screws that are holding the panel in place.
Now, you need to remove the factory speaker if it is there, but make sure not to rip the wiring harness that it is attached to.
Plugin the new speaker to the wiring harness, and look for the speaker’s connection, as the positive terminal; however, if there is no wiring harness, then you need a crimped connection for it.
Don’t use electrical tape for wire connections, because it can be a risky choice. In case the temperature changes or weakens, it can lead to problems.
Test the speakers, so that the time you have spent installing, doesn’t go to waste. Now, reconnect the battery of the car, and turn on the stereo.
You need to listen to the sound and make sure that it is visible. If the speaker doesn’t work, then you need to check the electrical connection again, because this is a common problem in most installation cases. Visit more: AmazeInvent
When you are sure that the new speakers are working, then secure them properly; in most cases, you won’t need a bracket to secure them. However, if you do need a mounting bracket, then it is easily available in the market or might even come with the speakers.
Before working on the installation of the speaker, you should always check their size.
Some people need side speakers and not the main speakers in the car, but the installation process is the same. Don’t forget to take precautionary measures, to make sure things go alright.